NAME
    SpeedyCGI - Speed up perl scripts by running them persistently.

SYNOPSIS
     #!/usr/bin/speedy

     ### Your Script Here
     print "Content-type: text/html\n\nHello World!\n";

     ##
     ## Optionally, use the CGI::SpeedyCGI module for various things
     ##

     # Create a SpeedyCGI object
     use CGI::SpeedyCGI;
     my $sp = CGI::SpeedyCGI->new;

     # See if we are running under SpeedyCGI or not.
     print "Running under speedy=", $sp->i_am_speedy ? 'yes' : 'no', "\n";

     # Register a shutdown handler
     $sp->add_shutdown_handler(sub { do something here });

     # Register a cleanup handler
     $sp->register_cleanup(sub { do something here });

     # Set/get some SpeedyCGI options
     $sp->setopt('timeout', 30);
     print "maxruns=", $sp->getopt('maxruns'), "\n";

DESCRIPTION
    SpeedyCGI is a way to run perl scripts persistently, which can make them run
    much more quickly. A script can be made to to run persistently by changing
    the interpreter line at the top of the script from:

        #!/usr/bin/perl

    to

        #!/usr/bin/speedy

    After the script is initially run, instead of exiting, the perl interpreter
    is kept running. During subsequent runs, this interpreter is used to handle
    new executions instead of starting a new perl interpreter each time. A very
    fast frontend program, written in C, is executed for each request. This fast
    frontend then contacts the persistent Perl process, which is usually already
    running, to do the work and return the results.

    By default each perl script runs in its own Unix process, so one perl script
    can't interfere with another. Command line options can also be used to deal
    with programs that have memory leaks or other problems that might keep them
    from otherwise running persistently.

    SpeedyCGI can be used to speed up perl CGI scripts. It conforms to the CGI
    specification, and does not run perl code inside the web server. Since the
    perl interpreter runs outside the web server, it can't cause problems for
    the web server itself.

    SpeedyCGI also provides an Apache module so that under the Apache web
    server, scripts can be run without the overhead of doing a fork/exec for
    each request. With this module a small amount of frontend code is run within
    the web server - the perl interpreters still run outside the server.

    SpeedyCGI and PersistentPerl are currently both names for the same code.
    SpeedyCGI was the original name, but because people weren't sure what it
    did, the name PersistentPerl was picked as an alias. At some point SpeedyCGI
    will probably be replaced by PersistentPerl, or become a sub-class of
    PersistentPerl to avoid always having two distributions.

OPTIONS
  Setting Option Values

    SpeedyCGI options can be set in several ways:

    Command Line
        The speedy command line is the same as for regular perl, with the
        exception that SpeedyCGI specific options can be passed in after a "--".

        For example the line:

                #!/usr/bin/speedy -w -- -t300

        at the top of your script will set the perl option "`-w'" and will pass
        the "`-t'" option to SpeedyCGI, setting the Timeout value to 300
        seconds.

    Environment
        Environment variables can be used to pass in options. This can only be
        done before the initial execution, not from within the script itself.
        The name of the environment variable is always SPEEDY_ followed by the
        option name in upper-case. For example to set the speedy Timeout option,
        use the environment variable named SPEEDY_TIMEOUT.

    Module
        The CGI::SpeedyCGI module provides the setopt method to set options from
        within the perl script at runtime. There is also a getopt method to
        retrieve the current options. See the section on "METHODS" below.

    Apache
        If you are using the optional Apache module, SpeedyCGI options can be
        set in the httpd.conf file. The name of the apache directive will always
        be Speedy followed by the option name. For example to set the Timeout
        option, use the apache directive SpeedyTimeout.

  Context

    Not all options below are available in all contexts. The context for which
    each option is valid is listed on the "Context" line in the section below.
    There are three contexts:

    speedy
        The command-line "speedy" program, used normally with #! at the top of
        your script or from a shell prompt.

    mod_speedycgi
        The optional Apache mod_speedycgi module.

    module
        During perl execution via the CGI::SpeedyCGI module's getopt/setopt
        methods.

  Options Available

    BackendProg
            Command Line    : -p<string>
            Default Value   : "/usr/bin/speedy_backend"
            Context         : mod_speedycgi, speedy

            Description:

                Path to the speedy backend program.

    BufsizGet
            Command Line    : -B<number>
            Default Value   : 131072
            Context         : speedy

            Description:

                Use <number> bytes as the maximum size for the buffer that
                receives data from the perl backend.

    BufsizPost
            Command Line    : -b<number>
            Default Value   : 131072
            Context         : speedy

            Description:

                Use <number> bytes as the maximum size for the buffer that
                sends data to the perl backend.

    Group
            Command Line    : -g<string>
            Default Value   : "none"
            Context         : mod_speedycgi, speedy

            Description:

                Allow a single perl interpreter to run multiple scripts.
                All scripts that are run with the same group name and by
                the same user will be run by the same group of perl
                interpreters. If the group name is "none" then grouping is
                disabled and each interpreter will run one script.
                Different group names allow scripts to be separated into
                different groups. Name is case-sensitive, and only the
                first 12-characters are significant. Specifying an empty
                group name is the same as specifying the group name
                "default" - this allows just specifying "-g" on the command
                line to turn on grouping.

    MaxBackends
            Command Line    : -M<number>
            Default Value   : 0 (no max)
            Context         : mod_speedycgi, speedy

            Description:

                If non-zero, limits the number of speedy backends running
                for this perl script to <number>.

    MaxRuns
            Command Line    : -r<number>
            Default Value   : 500
            Context         : mod_speedycgi, module, speedy

            Description:

                Once the perl interpreter has run <number> times, re-exec
                the backend process.  Zero indicates no maximum.  This
                option is useful for processes that tend to consume
                resources over time.

    PerlArgs
            Command Line    : N/A
            Default Value   : ""
            Context         : mod_speedycgi

            Description:

                Command-line options to pass to the perl interpreter.

    Timeout
            Command Line    : -t<number>
            Default Value   : 3600 (one hour)
            Context         : mod_speedycgi, module, speedy

            Description:

                If no new requests have been received after <number>
                seconds, exit the persistent perl interpreter.  Zero
                indicates no timeout.

    TmpBase
            Command Line    : -T<string>
            Default Value   : "/tmp/speedy"
            Context         : mod_speedycgi, speedy

            Description:

                Use the given prefix for creating temporary files.  This
                must be a filename prefix, not a directory name.

    Version
            Command Line    : -v
            Context         : speedy

            Description:

                Print the SpeedyCGI version and exit.

METHODS
    The following methods are available in the CGI::SpeedyCGI module.

    new Create a new CGI::SpeedyCGI object.

            my $sp = CGI::SpeedyCGI->new;

    register_cleanup($function_ref)
        Register a function that will be called at the end of each request,
        after your script finishes running, but before STDOUT and STDERR are
        closed. Multiple functions can be added by calling the method more than
        once. At the end of the request, each function will be called in the
        order in which it was registered.

            $sp->register_cleanup(\&cleanup_func);

    add_shutdown_handler($function_ref)
        Add a function to the list of functions that will be called right before
        the perl interpreter exits. This is not at the end of each request, it
        is when the perl interpreter decides to exit completely due to a Timeout
        or reaching MaxRuns.

            $sp->add_shutdown_handler(sub {$dbh->logout});

    set_shutdown_handler($function_ref)
        Deprecated. Similar to `add_shutdown_handler', but only allows for a
        single function to be registered.

            $sp->set_shutdown_handler(sub {$dbh->logout});

    i_am_speedy
        Returns a boolean telling whether this script is running under SpeedyCGI
        or not. A perl script can run under regular perl, or under SpeedyCGI.
        This method allows the script to tell which environment it is in.

            $sp->i_am_speedy;

        To make your script as portable as possible, you can use the following
        test to make sure both the SpeedyCGI module is available and you are
        running under SpeedyCGI:

            if (eval {require CGI::SpeedyCGI} && CGI::SpeedyCGI->i_am_speedy) {
                Do something SpeedyCGI specific here...

        To increase the speed of this check you can also test whether the
        following variable is defined instead of going through the object
        interface:

            $CGI::SpeedyCGI::i_am_speedy

    setopt($optname, $value)
        Set one of the SpeedyCGI options given in the section on "Options
        Available". Returns the option's previous value. $optname is
        case-insensitive.

            $sp->setopt('TIMEOUT', 300);

    getopt($optname)
        Return the current value of one of the SpeedyCGI options. $optname is
        case-insensitive.

            $sp->getopt('TIMEOUT');

    shutdown_now
        Shut down the perl interpreter right away. This function does not
        return.

            $sp->shutdown_now

    shutdown_next_time
        Shut down the perl interpreter as soon as this request is done.

            $sp->shutdown_next_time

INSTALLATION
    To install SpeedyCGI you will need to either download a binary package for
    your OS, or compile SpeedyCGI from source code. See the section on
    "DOWNLOADING" for information on where to obtain the source code and
    binaries.

  Binary Installation

    Once you have downloaded the binary package for your OS, you'll need to
    install it using the normal package tools for your OS. The commands to do
    that are:

    Linux
         rpm -i <filename>

    Solaris
         gunzip <filename>.gz
         pkgadd -d <filename>

    BSD
         pkg_add <filename>

    If you are also installing the apache module you will have to configure
    Apache as documented in the section on "Apache Configuration".

  Source Code Installation

    To compile SpeedyCGI you will need perl 5.004 or later, and a C compiler,
    preferably the same one that your perl distribution was compiled with.
    SpeedyCGI is known to work under Solaris, Redhat Linux, FreeBSD and OpenBSD.
    There may be problems with other OSes or earlier versions of Perl. SpeedyCGI
    may not work with threaded perl -- as of release 2.10, Linux and Solaris
    seem to work OK with threaded perl, but FreeBSD does not.

  Standard Install

    To do a standard install from source code, execute the following:

        perl Makefile.PL
        make
        make test
        make install

    This will install the speedy and speedy_backend binaries in the same
    directory where perl was installed, and the SpeedyCGI.pm module in the
    standard perl lib directory. It will also attempt to install the
    mod_speedycgi module if you have the command apxs in your path.

  Install in a Different Directory

    If you don't have permission to install into the standard perl directory, or
    if you want to install elsewhere, the easiest way is to compile and install
    your own copy of perl in another location, then use your new version of perl
    when you run "perl Makefile.PL". The SpeedyCGI binaries and module will then
    be installed in the same location as the new version of perl.

    If you can't install your own perl, you can take the following steps:

    *   Edit src/optdefs and change the default value for BackendProg to the
        location where speedy_backend will be installed.

    *   Compile as above, then manually copy the speedy and speedy_backend
        binaries to where you want to install them.

    *   If you want to use the CGI::SpeedyCGI module in your code (it's not
        required), you will have to use "use lib" so it can be located.

  Apache Installation

    To compile the optional apache mod_speedycgi module you must have the apxs
    command in your path. Redhat includes this command with the "apache-devel"
    RPM, though it may not work properly for installation.

    If the apache installation fails:

    *   Copy the mod_speedycgi.so from the mod_speedycgi directory, or from the
        mod_speedycgi2/.libs directory, to wherever your apache modules are
        stored (try /usr/lib/apache)

    *   Edit your httpd.conf (try /etc/httpd/conf/httpd.conf) and add the
        following lines. The path at the end of the LoadModule directive may be
        different in your installation -- look at other LoadModules to see.

            LoadModule speedycgi_module modules/mod_speedycgi.so

        If you are using Apache-1, also add:

            AddModule mod_speedycgi.c

  Apache Configuration

    Once mod_speedycgi is installed, it has to be configured to be used for your
    perl scripts. There are two methods.

    Warning! The instructions below may compromise the security of your web
    site. The security risks associated with SpeedyCGI are similar to those of
    regular CGI. If you don't understand the security implications of the
    changes below then don't make them.

    1. Path Configuration
        This is similar to the way /cgi-bin works - everything under this path
        is handled by SpeedyCGI. Add the following lines near the top of your
        httpd.conf - this will cause all scripts in your cgi-bin directory to be
        handled by SpeedyCGI when they are accessed as /speedy/script-name.

            Alias /speedy/ /home/httpd/cgi-bin/
            <Location /speedy>
                SetHandler speedycgi-script
                Options ExecCGI
                allow from all
            </Location>

    2. File Extension Configuration
        This will make SpeedyCGI handle all files with a certain extension,
        similar to the way .cgi files work. Add the following lines near the top
        of your httpd.conf file - this will set up the file extension ".speedy"
        to be handled by SpeedyCGI.

            AddHandler speedycgi-script .speedy
            <Location />
                Options ExecCGI
            </Location>

FREQUENTLY ASKED QUESTIONS
    How does the speedy front end connect to the back end process?
        Via a Unix socket in /tmp. A queue is kept in a shared file in /tmp that
        holds an entry for each process. In that queue are the pids of the perl
        processes waiting for connections. The frontend pulls a process out of
        this queue, connects to its socket, sends over the environment and argv,
        and then uses this socket for stdin/stdout to the perl process.

    If another request comes in while SpeedyCGI script is running, does the
    client have to wait or is another process started? Is there a way to set a
    limit on how many processes get started?
        If another request comes while all the perl processes are busy, then
        another perl process is started. Just like in regular perl there is
        normally no limit on how many processes get started. But, the processes
        are only started when the load is so high that they're necessary. If the
        load goes down, the processes will die off due to inactivity, unless you
        disable the timeout.

        Starting in version 1.8.3 an option was added to limit the number of
        perl backends running. See MaxBackends in the section on "Options
        Available" above.

    How much of perl's state is kept when speedy starts another request? Do
    globals keep their values? Are destructors run after the request?
        Globals keep their values. Nothing is destroyed after the request.
        STDIN/STDOUT/STDERR are closed -- other files are not. `%ENV' and
        `@ARGV' are the only globals changed between requests.

    How can I make sure speedy restarts when I edit a perl library used by the
    CGI?
        Do a touch on the main cgi file that is executed. The mtime on the main
        file is checked each time the front-end runs.

    Do I need to be root to install and/or run SpeedyCGI?
        No, root is not required.

    How can I determine if my perl app needs to be changed to work with speedy?
    Or is there no modification necessary?
        You may have to make modifications.

        Globals retain their values between runs, which can be good for keeping
        persistent database handles for example, or bad if your code assumes
        they're undefined.

        Also, if you create global variables with "my", you shouldn't try to
        reference those variables from within a subroutine - you should pass
        them into the subroutine instead. Or better yet just declare global
        variables with "use vars" instead of "my" to avoid the problem
        altogether.

        Here's a good explanation of the problem - it's for mod_perl, but the
        same thing applies to speedycgi:

            http://perl.apache.org/faq/mod_perl_cgi.html#Variables_retain_their_value_fro

        If all else fails you can disable persistence by setting MaxRuns to 1.
        The only benefit of this over normal perl is that speedy will
        pre-compile your script.

    How do I keep a persistent connection to a database?
        Since globals retain their values between runs, the best way to do this
        is to store the connection in a global variable, then check on each run
        to see if that variable is already defined.

        For example, if your code has an "open_db_connection" subroutine that
        returns a database connection handle, you can use the code below to keep
        a persistent connection:

            use vars qw($dbh);
            unless (defined($dbh)) {
                $dbh = &open_db_connection;
            }

        This code will store a persistent database connection handle in the
        global variable "$dbh" and only initialize it the first time the code is
        run. During subsequent runs, the existing connection is re-used.

        You may also want to check the connection each time before using it, in
        case it is not working for some reason. So, assuming you have a
        subroutine named "db_connection_ok" that returns true if the db
        connection is working, you can use code like this:

            use vars qw($dbh);
            unless (defined($dbh) && &db_connection_ok($dbh)) {
                $dbh = &open_db_connection;
            }

    Why do scripts with persistent Oracle database connections hang?
        When using an IPC connection to Oracle, an oracle process is fork'ed and
        exec'ed and keeps the stdout connection open, so that the web server
        never gets an EOF. To fix the problem, either switch to using a TCP
        connection to the database, or add the following perl code somewhere
        before the DBI->connect statement:

            use Fcntl;
            fcntl(STDOUT, F_SETFD, FD_CLOEXEC);

        This will set the close-on-exec flag on standard out so it is closed
        when oracle is exec'ed.

USING GROUPS
    The group feature in SpeedyCGI can be used to help reduce the amount of
    memory used by the perl interpreters. When groups are not used (ie when
    group name is "none"), each perl script is given its own set of perl
    interpreters, separate from the perl interpreters used for other scripts. In
    SpeedyCGI each perl interpreter is also a separate system process.

    When grouping is used, perl interpreters are put into a group. All perl
    interpreters in that group can run perl scripts in that same group. What
    this means is that by putting all your scripts into one group, there could
    be one perl interpreter running all the perl scripts on your system. This
    can greatly reduce your memory needs when running lots of different perl
    scripts.

    SpeedyCGI group names are entities unto themselves. They are not associated
    with Unix groups, or with the Group directive in Apache. Group names are
    created by the person running SpeedyCGI based on their needs. There are two
    special group names "none" and "default". All other group names are created
    by the user of SpeedyCGI using the Group option described in the section on
    "OPTIONS".

    If you want to use the maximum amount of grouping possible (ie all scripts
    in the same interpreter), then you should always use the group name
    "default". When you do this, you will get the fewest number of perl
    interpreters possible. Each perl interpreter will be able to run any of your
    perl scripts.

    Although using group "default" for all scripts results in the most efficient
    use of resources, it's not always possible or desirable to do this. You may
    want to use other group names for the following reasons:

    * To isolate misbehaving scripts, or scripts that don't work in groups.
        Some scripts cannot work in groups. When perl scripts are grouped
        together they are each given their own unique package name - they are
        not run out of the "main" package as they normally would be. So, for
        example, a script that explicitly uses "main" somewhere in its code to
        find its subroutines or variables probably won't work in groups. In this
        case, it's probably best to run such a script with group "none", so it
        is compiled and run out of package main, and always given its own
        interpreter.

        Other scripts may make changes to included packages, etc, that may break
        other scripts running in the same interpreter. In this case such scripts
        can be given their own group name (like group name "pariah") to keep
        them away from other scripts that they are incompatible with. The rest
        of your scripts can then run out of group "default". This will ensure
        that the "pariah" scripts won't run within the same interpreter as your
        other scripts.

    * To pass different perl or SpeedyCGI parameters to different scripts.
        You may want to use separate groups to create separate policies for
        different scripts.

        Say you have an email application that contains ten perl scripts, and
        since the common perl code used in this application has a bad memory
        leak, you want to use a MaxRuns setting of 5 for all of these scripts.
        You then want all your other scripts to run in a separate group with a
        normal MaxRuns policy. What you can do is edit the ten email scripts,
        and at the top, put in the line:

            #!/usr/bin/speedy -- -gmail -r5

        In the rest of your perl scripts you can use:

            #!/usr/bin/speedy -- -g

        What this will do is put the ten email scripts into a group of their own
        (named "mail") and give them all the default MaxRuns value of 5. All
        other scripts will be put into the group named "default", and this group
        will have the normal MaxRuns setting.

DOWNLOADING
  Binaries

    Binaries for many OSes can be found at:

        http://daemoninc.com/SpeedyCGI/download.html

  Source Code

    The standard source code distribution can be retrieved from any CPAN mirror
    or from:

        http://daemoninc.com/SpeedyCGI/download.html
        http://www.cpan.org/modules/by-authors/id/H/HO/HORROCKS/

    The latest development code can be obtained from the SourceForge CVS
    repository using the following commands:

     cvs -d:pserver:anonymous@cvs.SpeedyCGI.sourceforge.net:/cvsroot/speedycgi login 
     cvs -z3 -d:pserver:anonymous@cvs.SpeedyCGI.sourceforge.net:/cvsroot/speedycgi co 2.x

    Press Enter when prompted for a password.

AUTHOR
        Sam Horrocks
        http://daemoninc.com
        sam@daemoninc.com

  Contributors

    A lot of people have helped out with code, patches, ideas, resources, etc.
    I'm sure I'm missing someone here - if so, please drop me an email.

    *   Gunther Birznieks

    *   Diana Eichert

    *   Takanori Kawai

    *   Robert Klep

    *   Marc Lehmann

    *   James McGregor

    *   Josh Rabinowitz

    *   Dave Parker

    *   Craig Sanders

    *   Joseph Wang

SEE ALSO
    perl(1), httpd(8), apxs(8).

MORE INFORMATION
  SpeedyCGI Home Page

    http://daemoninc.com/SpeedyCGI/

  Mailing List

    *   SpeedyCGI users mailing list - speedycgi-users@lists.sourceforge.net.
        Archives and subscription information are at
        http://lists.sourceforge.net/lists/listinfo/speedycgi-users

    *   SpeedyCGI announcements mailing list -
        speedycgi-announce@lists.sourceforge.net. Archives and subscription
        information are at
        http://lists.sourceforge.net/lists/listinfo/speedycgi-announce

  Bugs and Todo List

    Please report any bugs or requests for changes to the mailing list.

    The current bugs / todo list can be found at
    http://www.sourceforge.net/projects/speedycgi/. Go to the Bug Tracking menu
    and select the group "bug" for bugs, or the group "rfe" for the todo list.

  Japanese Translation

    http://member.nifty.ne.jp/hippo2000/perltips/CGI/SpeedyCGI.htm

  Benchmarks

    http://daemoninc.com/SpeedyCGI/benchmarks/

  Success Stories

    http://daemoninc.com/SpeedyCGI/success_stories/

  Revision History

    http://daemoninc.com/SpeedyCGI/CGI-SpeedyCGI/Changes

  YAPC 2001 Presentation

    I gave an Introduction to SpeedyCGI talk at YAPC 2001. It can be found at
    http://daemoninc.com/SpeedyCGI/yapc_2001/

COPYRIGHT
    Copyright (C) 2002 Sam Horrocks

    This program is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the Free
    Software Foundation; either version 2 of the License, or (at your option)
    any later version.

    This program is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
    more details.

    You should have received a copy of the GNU General Public License along with
    this program; if not, write to the Free Software Foundation, Inc., 59 Temple
    Place - Suite 330, Boston, MA 02111-1307, USA.

    This product includes software developed by the Apache Software Foundation
    (http://www.apache.org/).

